Connect mobile Wi-Fi to your computer. How to connect your phone to a computer - Nothing could be easier

Internet via a mobile phone or smartphone that supports 2G and/or 3G communication technology can be configured on the user's computer.

Let's look at all the available ways to configure this.

Connect your PC to the Internet via a smartphone (Wi Fi hotspot)

If you use your PC and urgently need access to the Internet, but you don’t have a cable or router at hand, you can set up your smartphone as an access point.

It will work like a router and you can connect to it from your computer.

Follow the instructions below to connect your laptop or PC to your smartphone with mobile internet:

• Enable the wireless network in your computer's settings;

• Now go to the settings of your smartphone or tablet;
• Select the wireless network menu and then "access point". In earlier versions of Android, click on the item “Modem and router mode”;
• In the window that opens, click on router settings;

• In the window that opens, create a name for the access point (any) and a password (minimum 8 characters). Click save and then move the slider that turns on the hotspot;
• Now from your PC, connect to your mobile router just like you would to any other wifi router.

Connecting a smartphone to a computer as a modem

To connect, you must have a USB cable (to connect your smartphone to your PC).

Follow the instructions:

• Immediately after connecting the smartphone, a dialog box appears on its screen asking you to select a connection mode. Ignore this window and close it;
• Go to the main menu of the device and then go to the phone settings;
• Open the USB modem setup window and set it to “Enabled” mode, as shown in the figure;

• After enabling modem mode on your smartphone, the computer will automatically begin installing the necessary driver software. Several dialog boxes will appear during the driver installation process.
  The user must check permission for subsequent connections to the modem, and also indicate the desired type of connection network);
• After installing the driver, the PC will be connected to the network. A network connection icon will appear in the notification area of ​​your operating system.

Pay attention! Computers with older versions of the operating system, for example,WindowsXP/Vista cannot automatically start installing the necessary drivers. In this case, you need to download the software from the official website of the smartphone manufacturer.

To make your Internet connection faster, select 3G connection technology in your smartphone’s mobile Internet settings.

Internet access from a computer via a regular cell phone

You can go online from your computer by connecting to it the most common cell phone.

There are several requirements for a mobile phone:

• it must support 3G, GPRS or EDGE connection technology,
• availability of a phone driver installed on the PC,
• SIM card with configured Internet and funds in the account,
• You also need a USB cable to connect your cell phone to your PC.

Follow the instructions to find out how to connect the Internet on your computer via your mobile phone:

• Install the modem driver on your personal computer. You can download it from the website of the mobile device manufacturer;
• After installing the driver, you need to initialize the modem. To do this, connect your mobile to your PC and open the device manager;

• In the tab with modems, select a cell phone, right-click on it and open the properties tab, then find the field for additional initialization parameters and write the following line in this field: AT+CGDCONT=1,"IP","active". Click OK;

• Now you need to create a connection. Open the network and sharing management window and select creating a new network, as shown in the figure below;

• Enter the dial-up number in the window that opens (usually *9**#, the number must be checked with your mobile operator);
• Enter the information you received from the operator in the window shown in the screenshot below and click on the Create button.

Despite the general trend of computer literacy, in our time there are still many people whose user experience is not so rich in order to easily solve certain communication or networking problems. If you don’t know how to do it via WiFi, then reading this article will benefit you. However, the methods for comprehensive synchronization of electronic devices and obtaining wireless access to the Internet, which you will learn about from the material below, are also effective for other mobile devices, be it a tablet or a modern smartphone. The main thing is that the computer and the device connected to it must be equipped with a special Wi-Fi module or an adapter of the same name.

Where does networking begin?

Of course, before you receive instructions via WiFi, you need to understand for what purposes you will use the wireless connection. Since for the usual synchronization of a mobile phone with a computer and gaining access to the Internet through a “finished” device, there are various methods. It is worth noting that the last option looks a little more complicated in terms of implementation. However, with the advice outlined in the article, you will achieve your goals without much effort.

How to connect your phone to your computer via WiFi: the easiest way

In the case when the user has a modern laptop and smartphone, the process of “networking” of electronic devices comes down to simply pressing a few keys:

• Turn on the Wi-Fi adapter on your laptop.
• Activate the option to search for wireless network devices on your smartphone.
• Once your phone detects your laptop, exchange your pins and enjoy the benefits of modern technology.

However, the method presented above may not work if certain drivers are missing on the computer. To fix this kind of “digital trick,” download and install special software on your laptop. For example, after the AirDroid program automatically assigns a special IP address to your smartphone, all you have to do is enter it into the address bar of the browser installed on your computer, and voila! — synchronization has occurred.

Contacts, messages, photos, music and documents: destination - hard drive

When you urgently need to transfer some information to your computer, the question is: “How to connect your phone to your computer via Wi-Fi?” will require permission as soon as possible. The synchronization method described above is quite suitable if you need to save diverse multimedia content or digital documents stored in the “memory area” of the phone on your computer hard drive. However, even if you copy (in the manner described above) the phone book to your PC’s hard drive, it is unlikely that you will be able to familiarize yourself with the contents of the resulting container. As you understand, in such a situation you will need a specialized program, the use of which will certainly be a practical answer to your question “how to connect a smartphone via Wi-Fi to a computer.” By the way, if you have not yet installed on your PC a proprietary utility from the manufacturer of your phone (software that allows you to seamlessly work with your device on a desktop or laptop), know: you have lost a lot...

I want unlimited internet!

We will divide the next option for using Wi-Fi wireless technology into two subtypes. The first is connecting to the global network through an independent router, which is an access point. The second is a similar method, in which the user uses a laptop. Let's look at the first option in more detail.

The router gives the go-ahead for connection!

So, dear reader, we bring to your attention a “visual” answer to the question: “How to connect your phone to a computer via a WiFi router?” By the way, after implementing the instructions described below, you will be able not only to view files and recordings stored in the smartphone’s memory on the PC screen, but also to do the opposite - open computer folders directly on the mobile device, as well as play multimedia content using the phone’s hardware. Agree, this is incredibly convenient when the only PC in the family is occupied by one of the family members.

Software and local network organization

Connecting an Android device to a computer via Wi-Fi (using the described method) involves the use of special software, which must first be installed on the smartphone. However, any other mobile operating system will also require the installation of third-party software to implement the network project being covered.

• So, let's take "ES Explorer" as an example. This application is distributed absolutely free of charge through the Play Market, from where you are invited to download it.
• After installing and launching this software, go to the “LAN” tab.
• Next, you need to run the “SCAN” command and find the local computer.
• The next step is to click the “Create” button and set the connection parameters.

As a result, you will get a practical answer to the question: “How to connect Android via WiFi to a network or computer?”

What wasn't said...

It should be noted that you must first configure the local network: activate the network discovery option for all network profiles and check the automatic configuration option, and also disable password protection for network access. In the properties of folders that you want to open on your smartphone, all restrictions for general use must be removed. Remember: if your device finally sees the network, but nevertheless cannot open a single Internet page, all this indicates that the network parameters and settings are incorrect.

Second option: we distribute the Internet from a laptop

• Download and install the VirtualRouter Plus program.
• After launching the mentioned software, in the window that opens, specify the connection name, set a password and select the working network in the lowest checkbox.
• Click the "Start Virtual" button.

Now you can easily access the Internet using your laptop as a router. Of course, the laptop must have a connection to the global network via a power cord.

Summing up

Congratulations: you have become the owner of the knowledge of how to connect your phone to a PC via WiFi. Perhaps, to the great regret of many, we did not touch on Bluetooth wireless connection technology due to the impossibility of covering everything in one article. However, we will still mention something: when using “blue tooth” in organizing the above-described network circuits, the user is unlikely to be pleased with the correctness and speed of data transfer. Therefore, arm yourself with new technologies, and leave Bluetooth for exchanging data with devices that do not have Wi-Fi capabilities. Wishing you high-speed connection and fruitful Internet sessions!

Connecting Android to your computer via Wi-Fi is easy, and there are even a few different options for how to do it. Thus, the user can not only gain access to files, but also fully control the gadget remotely. Previously, we told you how to connect and implement.

How to connect Android to PC via Wi-Fi

To make this possible, we will need to install special applications on both the computer and the smartphone (or tablet). But there's no problem with that. You can easily find any program you need on GooglePlay.
So, let's look at how to connect an Android gadget to a computer over the air. Here you first need to decide what exactly you want to connect for. The fact is that specific applications are used for different tasks. For example, to access files, you can use the FTP server program, which must be installed on your smartphone.

Once launched, the application will assign an IP address to the phone. It will need to be registered in the browser or file explorer on the computer. After this, you will have access to the smartphone files from your computer.

Here is a list of the most common applications that allow access to Android from a PC via Wi-Fi:

• FTP server.
• AirDroid.
• MyPhoneExplorer.

It is worth noting that the FTP server allows you to work exclusively with files from internal memory and flash drives. If you need access to messages, phone book and other applications on your phone, then MyPhoneExplorer will help you.

This is a convenient utility that allows full access. At the same time, you can freely delete contacts, send messages, and so on.
For this program to work, you will need to install it on both your smartphone and your computer. After launch, select the connection method:

• Wi-Fi.
• Bluetooth.

Next, the system is synchronized. In the utility settings on your phone, you can specify the PIN code that will be required for synchronization. To do this, click the “Settings” button and select “Wi-Fi-PIN”.


Now all that remains is to enter the specified PIN code and the name of the connected smartphone.

Moreover, the name can be anything you want. It is introduced for convenience, so that in the future you can see which device you are working with.


Now you know how to access your Android phone from your computer using Wi-Fi.

Sometimes it doesn't stop there. To access the Internet on a smartphone, a Wi-Fi connection is most often used. But what if you don’t have a wireless router, but your laptop is connected to the Internet via a cable? In this case, you can distribute Wi-Fi from your laptop.

In this case, all connected devices will have access to the global network. So, let's take a closer look at how to do this.

Connecting Android to computer via Wi-Fi: Video

Distributing Wi-Fi from a laptop

You can distribute the network both from a laptop and from a desktop PC. But, if laptops are almost always equipped with wireless adapters, then with a desktop PC everything is somewhat more complicated. Before proceeding to further actions, make sure that the latter is equipped with a Wi-Fi module.
We have two options for how to connect the Internet from a computer to a mobile phone running Android OS via Wi-Fi:

• Use built-in Windows utilities.
• Install a special utility from a third-party developer.

The first option does not require you to search for and install additional programs. It involves setting up a PC using the command line. Essentially, you only have to run two commands. Let's take a closer look at this process.

Networking via the command line

First, let's start the service we need. This is done like this: press the key combination [Start]+[R]. In the window that appears, write CMD and click .

Thus we launched the command line. Now it remains to write two commands:

So, now you distribute Wi-Fi, but users still cannot connect to you and do not have access to the Internet. To fix this, we need to set up sharing. To do this, right-click on the network icon in the system tray. Select Network and Sharing Center.

Go to the "Change advanced sharing settings" section. Here you need to enable discovery and sharing in all points, and also disable password protection. Save the settings and return to the control center.



Open the "Change adapter settings" item.

Here you will see all the available computer connections. Our virtual giveaway will be called Wireless Connection 2. We need to select the connection through which the computer accesses the Internet. Right-click on it and select “Properties”.

Go to the "Access" tab. Next, check the box next to “Allow other users to use this computer’s Internet connection.”

Below in the “Connecting a home network” line, select our virtual network. Click OK. This completes the setup procedure. Now all connected subscribers will have access to the Internet.

Through third party programs

There is another way to connect the Internet from a laptop to a mobile phone running Android OS via Wi-Fi. It involves the use of third-party programs, for example, Virtual Router Plus. This program allows you to distribute the Internet via Wi-Fi.
In this case, the setting comes down to three points:

• Create and enter a network name.
• Set a security password.
• Specify an Internet connection that provides access to the Internet.

As you can see, everything is extremely simple. The first option is better because you do not need to install any utilities. At the same time, the connection is more stable and secure.

The second option is easier to set up and use, but sometimes certain problems and glitches may occur. Which option to choose is up to you.

How to distribute Wi-Fi from a laptop to Android: Video

Nowadays it is becoming increasingly popular to connect mobile devices to each other wirelessly. This is primarily convenient because you don’t have to carry wires with you in case you need to connect your Android smartphone to your laptop. In this article, we will show you how to connect Android to laptop via Wi-Fi and vice versa depending on your specific purpose.

Types of connection

Let's start with the fact that the connection can be of different types, whether you just need access to the phone's Internet via Wi-Fi or access to files, management of call and message logs. Each type has a different setup and a different software package that is used.

Phone to computer

Internet distribution

Let's consider the option when your laptop is connected to the Internet via a cable, and not through a router. In this case, it is possible to distribute the Internet to a smartphone via Wi-Fi, and the laptop will act as a router. There are several ways to do this, but we will describe the most universal method that you can use on Windows from versions 7 to 10.

To implement this method, you will need the My Public Wi-Fi program, which can be downloaded from this address.

• Install the program on your PC.
• Run it as administrator.
• By default, the program already has the necessary settings, namely: the specified network name, password and Internet source. To create an access point, you just need to click on the button at the bottom “Setup and Start Hotspot”.

• Enable your smartphone to search for Wi-Fi networks and connect to the one you need.

File management

There is another option for connecting Android to a laptop via Wi-Fi. In this case, you need both devices to be on the same network, connected to the same router or in the manner described above. Next, you need to install ES Explorer on your phone” from Google Play.

• On your computer, press the +[R] button combination and in the window that appears, write: CMD.

• In the console that opens, enter the ipconfig command and press the enter button.
• After the command, information about your computer’s network will appear, find the lines “IPv4 address” and “Default gateway” and remember them.

• On your smartphone, open the explorer that you downloaded from the link above.
• Swipe right and select Network.

• In the window that opens, select the “Create” command and fill in the following values:

1. Domain: Write the address of the main gateway.
2. Server: in this field you need to enter the address that you memorized in the “IPv4 address” line on your computer.
3. Check the box next to "Anonymous".
4. Click "OK" and it will connect to your laptop.

Computer to Android

Now let's look at how to connect a laptop to Android via Wi-Fi, again depending on the need.

We distribute the Internet

If you want to use your phone as a hotspot for your computer, follow these steps on your phone.

Note: Your mobile device must have a SIM card inserted with mobile internet access.

• Go to settings.

• Tap on “Modem Mode”.

• If desired, you can configure the network name and password by first selecting “Access Point Settings”.
• To start distributing the network, activate the switch opposite “Access Point”.

• On your computer, scan the networks and connect to the one you created.

Access to files and calls

We will also tell you how to connect a laptop to Android via Wi-Fi to manage files. To fully access your phone files, as well as messages and call logs, you will need the help of the My Phone Explorer program. You also need both devices to be on the same network.

There are situations when you have a laptop, but there is no connection to the Internet via fiber optic cable. Then the question arises, is it possible to connect the Internet on a computer via a phone, and how to do it. To connect the network to a PC in any conditions, a 3g/4g modem will help. In the absence of such a device, a smartphone can perfectly replace it. In this article, we will look at connecting a laptop/PC to the Internet via phones with different OSes, and will help you set the correct parameters.

Making your phone a Wi-Fi hotspot

To connect your computer to the Internet, your smartphone will play the role of . To do this, you need to set certain settings on it and make it an access point to access the network. But, before you start setting up, check if there is internet on your phone. If it is missing, top up your account or contact your mobile network operator. Let's look at setting up an access point for each OS installed on smartphones.

Android

iOS

Starting with version 4 of the OS, Apple smartphones have the ability to create a Personal Hotspot (personal access point). You can simultaneously connect up to 3 devices to the gadget via a wireless network.

You may also be interested in the article:

Windows Phone

Before setting up an access point, you must connect your phone to the Internet. A corresponding icon will appear in the Control Panel.

You may also be interested in the article:

PC/laptop setup

The Internet connection settings are the same as when connecting to a regular router. Just make sure the settings are in automatic mode.

On a MacBook, you only need to select your smartphone from the available connections, enter the previously set password and wait for the gadgets to connect. When connected, a corresponding icon in the form of two connected chain links will appear in the top line on the PC/laptop, and the number of connected devices will be displayed on the phone.

Connect via USB

To connect the Internet to a computer, no matter what OS is installed on your smartphone, use a USB cable to connect the turned on phone to the PC/laptop. With the correct settings of the mobile phone, after installing the drivers, the operating system itself identifies it as a modem.

Android

iOS

Apple products connect via Wi-Fi, Bluetooth or USB cable in the same way. The only difference will be in the last action. With this type of connection, your smart device will consume a minimal amount of energy.

Just remember to turn off tethering mode when you're not using it, as your phone will waste energy searching for paired devices.

Windows Phone

On devices with Windows Phone OS there is no function of using it as a USB modem. But you can connect it in any other way: by creating an access point and joining via Bluetooth or Wi-Fi.

PC/laptop setup

To connect to the telephone Internet via a computer in Windows OS, you first need to install drivers on your phone. They can be included on the disk that came with the gadget. If the disk was not available, the software can be downloaded on the Internet from the manufacturer’s website.

To connect an Android smartphone to a MacBook, you need to download the driver and install it. To do this, simply follow the instructions on the screen. If everything is configured correctly, your gadget will see the modem and connect to the network.

Setting up a connection via Bluetooth

To connect your phone via a Bluetooth wireless network to your computer, you need to make sure that these modules are in working order on both devices. And only after that configure the Internet connection.

Android

All actions will be similar to the above. They should differ only in the choice of modem mode.

iOS

The stages of action do not differ from the above, except for the last one. After setting up the modem mode, activate the Bluetooth module.